Home / Deliveries
Superalloy forgings and rings
| Item | Size | Standard | Document |
|---|---|---|---|
| Inconel 718 forging | to drawing | AMS 5662 / 5663 | 3.1 + UT report |
| Waspaloy rolled ring | to 1,200 mm OD | AMS 5707 | 3.1 + dimensional |
Bar and billet
| Item | Size | Standard | Document |
|---|---|---|---|
| Inconel 625 bar | 50 mm | ASTM B446 | 3.1 |
| Inconel 718 bar | 120 mm | AMS 5662 | 3.1 + UT |
Spring wire
| Item | Size | Standard | Document |
|---|---|---|---|
| Inconel X-750 wire | 1.20 mm | AMS 5698 | 3.1 + tensile |
High-temperature bolting
| Item | Size | Standard | Document |
|---|---|---|---|
| A193 B7 stud | M36 | A193 | 3.2 + 100% PMI |
| A194 2H nut | M36 | A194 | 3.2 + 100% PMI |
Nickel mesh and Monel plate
| Item | Size | Standard | Document |
|---|---|---|---|
| Ni201 woven mesh | 40 mesh, 0.25 mm | ASTM B456 | 3.1 + purity |
| Monel 400 plate | 6 mm | ASTM B127 | 3.1, NACE on request |
Anything outside these combinations is quoted from the drawing. The list exists so a buyer can see the shape of what this plant routinely certifies, not to limit what can be ordered.
What a first order looks like
Four stages, each with something the buyer can check.
1
Read the drawing
Grade, condition, test specification and quantity are taken from it.
2
Quote the route
Forming or drawing, heat treatment, inspection — priced as one route.
3
Tooling, if needed
A new die is quoted as its own line with its own lead time.
4
Ship with the record
The certificate carries the heat number that is on the part.
Three questions worth asking any supplier
- Is the heat number on the part itself, or only on the tag?
- Is the NDT class written on the order, or is it “standard”?
- Can a certificate from a delivery two years ago be retrieved by its heat number?